What are the requirements of storage Butt Weld Fittings
Now, hot Butt Weld Fittings still more extensive application, this kind of product after produced if there is no arrangement to be used, it will directly into the storage stage, so at the time of storage for Butt Weld Fittings, what items need to be aware of? Now follow us to the welding accessories manufacturers to learn together!
1, Butt Weld Fittings is a kind of high practical material, so we when to store it must ensure that its integrity, if we choose the environment there are some hard material and then to immediately clean up on them, in order to make sure the hardest substance Butt Weld Fittings will not cause friction and knock against.
2, ventilated dry place is highly beneficial for Butt Weld Fittings store, instead of those damp places for Butt Weld Fittings deposit is bad, because the Butt Weld Fittings in such an environment is easy to rust.
3. If we have some impurities in our environment, we should clean up the impurities in time.
Butt Weld Fittings using electroplating process, is that production line between tank and tank are straight, with perforation technology makes the solution will not be out of the overflow, or the production of each process is composed of circulatory system, only the circulation is not sent outside the system leakage or emissions, using the cycle of recycling, after passivation process no liquid waste, even not to clean, we only do clean production.
The greatest advantage of zinc sulfate is that it can reach 100% of the current rate, and the deposition rate is faster than that of other zinc plating processes. To disperse and galvanized ability improved, even the complicated structure of the original, also can plating, its protective performance is about three times as many other sheet metal, its grain more smooth, after 2 minutes, the thickness of it can meet the requirements.
As a manufacturer of well-known butt welding parts, we are very strict with the production process and ensure that we provide quality products to the public. And the pursuit of production without pollution, let us together keep our planet home!
Butt Weld Fittings is widely used in all walks of life, the use of its advantage is the ability to form a dense oxide in the air to protect the inside of the metal structure, if the welding scratch cases, due to the protection of the coating, it as a "sacrifice" of anode, to slow down the corrosion of steel, at the same time protect the structure of the blind Angle can reach the effect of corrosion resistance.
At the end of the west-east gas market is approximately in the residents, the use of a lot of Butt Weld Fittings, as a result of the traditional connection easy to leak, and affects the shortcomings of the overall architectural appearance, searching for new connections become the inevitable choice and welding due to the good sealing, the advantages of high strength be adopted in the engineering. Because of the presence of zinc coating, Butt Weld Fittings cracks and slag can occur if the welding is not in place, which makes it difficult to guarantee the quality of welding. Therefore, it has a high demand for welding.